Bored? Try Angry Birds Rio on the Panda board!Posted on Wednesday, October 12, 2011 in Blog By Zach Pfeffer
Angry Birds Rio runs on the first 11.10 Panda staging build!
For these instructions, you need a PC running Ubuntu 11.04 or later. You also need to get the Android SDK from http://developer.android.com/sdk/ and install it. Also download the apk package file for the Angry Birds game (
Insert an SD card in a reader connected to your PC running Ubuntu 11.04 or later.
In a console type
dmesgand note which
/devnode the SD card was installed at. Let’s assume that this is
Install a few Ubuntu packages if needed: [code]sudo apt-get install linaro-image-tools bzr[/code]
Run these commands:
wget --no-check-certificate https://android-build.linaro.org/jenkins/job/linaro-android_staging-panda-11.10-release/1/artifact/build/out/target/product/pandaboard/boot.tar.bz2 wget --no-check-certificate https://android-build.linaro.org/jenkins/job/linaro-android_staging-panda-11.10-release/1/artifact/build/out/target/product/pandaboard/system.tar.bz2 wget --no-check-certificate https://android-build.linaro.org/jenkins/job/linaro-android_staging-panda-11.10-release/1/artifact/build/out/target/product/pandaboard/userdata.tar.bz2 bzr branch lp:linaro-image-tools ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdc --dev beagle --system system.tar.bz2 --userdata userdata.tar.bz2 --boot boot.tar.bz2
* Install the file over ADB:
adb install -r Angry_Birds_1.3.2.apk
* Save the birds!